Regarding the Place of Use

Do not use in places where gas (ammonia, chlorine, sulfur dioxide, etc.) is generated

Due to the lack of anti drip properties, please do not use in places where water or oil is dripping, and do not operate when water or oil is stuck on your hands

Especially in places with sandstorms, please install dust covers and carry out measures to improve dust resistance

Regarding the storage location

Storing in high temperature and high humidity environments, as well as long-term storage at room temperature, can easily cause oxidation reactions in the terminal area, leading to welding failures

Please avoid storing in high temperature and high humidity environments and use as soon as possible

Regarding the use of

Regarding wiring assignments: After wiring is completed, please ensure appropriate insulation distance

Regarding the setting of the switch: frequent use in the pressed state can accelerate part aging and cause changes in characteristics, so please avoid this operation

Do not touch the charging unit while it is powered on Do not connect multiple power sources to one switch It will cause circuit misoperation and short circuit

If you want to modify the numerical settings, do not operate the operation buttons with wet fingers or with oil or foreign objects on your hands If you want to remove surface dirt such as molded resin shells, we recommend using alcohol But please be careful not to let alcohol seep into the interior

Do not use solvents such as diluents that may seep into the resin

When connecting the switch unit, please connect the protruding and recessed parts of each housing

When dismantling the connection, please use a screwdriver to remove the upper and lower claws before proceeding Do not press the push button simultaneously Dropping may cause deformation of the terminals, damage to the printed circuit board, and breakage of the resin claws used to connect the switch side. Therefore, please be careful not to let it fall off